Wet Set Moisture Cure Liquid Rubber


Our Wet Set Moisture Cure Liquid Rubber is a Silylated Hybrid Polymer based on a Urethane/Polyether chemistry.
This innovative Polymer combination and treatment results in a unique combination of properties’
Coverage: At recommended 20 mil thick, 1 gallon covers 55 sq. ft. (see data sheet for other coverages)
• Coating cures in 1-3 hours by absorbing moisture from the air
NOTE: Catalyzed Pot Life is 50-80 min.
• Cures at temperatures as Low as 33° F (1°C)
• Film is elastomeric with high elongation
• Good adhesion to most substrate except TPO and PVC membrane
• Can be applied to a damp surface
• Withstands ponding water and total immersion
• Easily recoatable without a primer • Cures at low tempatures
• Ultra Violet stable
• Tolerates low temperatures to -50°F
• Can be sprayed without diluting
• Has very good in-can stability until catalyst is added • Will adhere to a fully cured film of Pro Flex Primer
• Coating is oil resistant so it can be used on restaurant roofs
• This product contains NO Isocyanates

Order Page……..Data Sheet……..MSDS Moisture Cure